BMX Peg Adapters Rear Axle

Fulfilled by our friends at Jack’D Bike Mods. Please contact them here if you have policy questions. JackRabbit's return policy does not apply to this product.

Notes: Does not come with pegs.

BMX Peg Adapters for JackRabbit OG2, OG2 Pro, XG, XG Pro, and MG

Turn your JackRabbit into a trick-ready or passenger-friendly ride with these BMX Peg Adapters from Jack’D Bike Mods. Designed as direct replacement axle nuts, these adapters convert your stock 12x1.25mm rear axle threads to a 14x1mm, allowing you to mount standard 14mm BMX pegs—threaded or threadless—on your JackRabbit.

This product does not work on the front axels of the JackRabbit bikes, or on the OG.

Includes:

- 2x Peg Adapters

- 2x 14x1mm Nuts

- Does not Include BMX Pegs

Tools Required:

- 19mm Wrench

- 19mm Socket with Ratchet and Extension

- Correct Size Wrench for Your Pegs (If Using Threaded Pegs)

Fun Use Cases:

- Give your friends a ride (within weight limit!)

- Pop controlled wheelies with better leverage and a better  balance point

- Add pegs for a freestyle or classic BMX look

Installation Instructions:

Pending

Disclaimer:

These adapters are not designed to be jumped on. Maximum recommended load is 220 lbs. If riding with a passenger, please ensure you are within your bikes rated  weight range. A slight angle of the pegs has been observed on occasion when installed, from testing this is not a concern and is minor. Jack’D Bike Mods holds no liability for any damage or injury caused by the use or installation of this product, or any other product sold.